Silver Hays There is a ‘yo’ missing on all RS pattern rows from row 15.
There should be a yo after SSM, K1, SSM, on every RS row to make 4 increases every RS row, either side of the 1st & last stitch and either side of the central stitch.
The Pocket Lining sections for both versions should read:
Leave these 16 [18: 20, 22, 24] sts on a stitch holder
There is an error in for the Right Front in the Divide for Pocket directions. After the "Divide for Pocket" subhead, the third mention of "Next Row" should be changed to Cast off 6 [6, 7, 7, 7) sts, knit to end.
The ** should be placed after the armhole shaping has been worked…[34(40,46) sts] **
Work as for Back to **.
Cont working straight until length measures 24(28,32) cm, ending on a WS row.
Shape front neck etc…
Shape shoulder..work as is for first side then: With RS facing, rejoin yarn to rem sts, cast off 12 centre sts, k to end.
K 1 row.
(RS) K2tog, k to end.
(WS) K to last 2 sts, k2tog.
Cont working as is...
There is a vertical line of squares missing from the extreme left hand edge of the chart, this is a repeat of the vertical line at the extreme right hand edge. So there will be one edge st at the right hand edge, 8 pattern repeat sts, then 2 edge sts at the left hand edge.
If you require an amended chart please send an e-mail marked Fairisle Cardigan Chart to: firstname.lastname@example.org.
Actual chest should read: HIPS and actual length to shoulder should read: LENGTH.
The word VENT could be misleading and the centre stitches form a PLEAT.
The slip sts that define the pleat are worked on every row until 92(94:96) sts remain, then on the following row, you will be casting off the centre 26 sts.
When making up, allow the back pleat to fold naturally along the slip st foldlines and sew cast off edge in position.
The 1st and 2nd rows of the Back need to be reversed, but the 1st row is still a wrong side row:
1st row (wrong side) K64(67:70), sl 1, k12, sl 1, k64(67:70).
2nd row K57(60:63), sl 1, k26, sl 1, k57(60:63).
To make up
Sew cast on edge of collar to cast off edge of back neck, easing to fit.
Using needles size 2½ mm, cast on 40-44-48 sts. Work in rnds 2 cm/0.8 in, in St st. Next rnd: *K2tog, 1 yo*, rep *-* across the rnd (= folding edge) + 2 cm/0.8 in, in St st. Change to needles size 3 mm. K 1 rnd, and adjust the number of sts evenly across the rnd to be 49-51-57 sts. Cont working in patt as foll: K4-5-8, *patt I, P1, K5, P1*, rep *-* across the rnd, end with K4-5-8. Inc 1 st mid under arm approx. every 3- 2½-2 cm/1.2-1-0.8 in until you have 57-61-69 sts on a rnd. When work measures 14-15-16 cm/5.5-5.9-6.3 in, or desired length, bind off 8 sts mid under arm. Cont working back and forth. Bind off at each edge every 2nd row 1x3, 1x2 and 1x1 sts. Bind off rem sts. Work same for the other sleeve. Weave in ends on WS. Sew on buttons.
The design Floral has the wrong amount of 50g balls needed to complete the project. It erroneously indicates 5-9 100g balls of Noro Kureyon, when Noro Kureyon is only available as a 50g ball. The amount of balls of yarns should be doubled (10-18 50g balls.)
The 10th Row of "Shape Top of the Beret" should read (K3, P4) 6 timesnot 8 times.
You will need 1(2:2) 50g balls in each of A and E, 1(1:2) 50g balls in each of B and D and 1(1:1) 50g ball in each of C and F; these amounts may vary depending on which shade you choose to use when picking up stitches for the sleeves and the neckband.
BACK AND FRONT
The 24-round colour stripe sequence, is given simply to establish the number of rounds in each shade and should not be worked before the stated 66(74:82) rounds, these rounds, before dividing for the Back and Front are the only rounds to be worked. We apologise if knitters were confused by the wording, please refer to the measurements given on the schematic.
Using natural, cast on 4 sts. Work in Stripe Pattern, increasing 1 st at each edge every right side rows: 63 times; and increase by YO before and after center 2 sts.
When piece measures 26 1/4” (66.5cm), bind/cast off rem 256 sts.
The smallest size should read for the shape sides…Inc 1 st each end foll 11th rows 4 times NOT 5..the other sizes are correct.
Given the length for the fronts is approx 31.5cm and the tension is 30 rows per 10cm it should easily accommodate 83 sts (smallest size)…picking up 62 sts along that length would tend to make the band pull up (but really it's up to the discretion of the knitter-- some knitters are tighter, some looser so it’s a bit of an average and what works best).
Chest measurements should read 10cm less than stated 1-2 yrs = 56cm
3-4 yrs= 61cm
Page 19, Sleeves
Change to 4.00mm needles.
Cont working in Garter st, AT THE SAME TIME shape sides...
Size to fit ages: 6-12 mths (1-2yrs, 3-4yrs, 5-6yrs)
Chest: 51 (56, 61, 66)cm/20 (22, 24, 26)in
100g balls of shade #03 x 2 (3, 4, 4)
Diagram … width of bodice at cast on edge should read.. 39.5, 46, 49.5, 51 cm
Shape armholes (RS) Cast off 7(7,8,8) sts, k to end.
(WS) Cast off 7(7,8,8) sts, p10(0,3,5), p2tog, [p3(5,4,4), p2tog] 10(12,14,14) times, p10(0,3,5). [60(74,78,82) sts]
Next row (RS) K2 * p2, k2; rep from * to end.
(WS) P2 * k2, p2; rep from * to end.
These 2 rows form rib pattern.
Shape shoulders and back neck
With RS facing rejoin yarn to rem sts.
Cast off 12(12,14,16) centre sts, patt to end.
The pattern doesn’t explain how to work inc’d sleeve sts.
When shaping the sleeve, work the inc’d sts in Stockinette stitch until 5 Inc Rnds have been worked. Incorporate those 5 new sts into the Vine Lace pattern. Cont to incorporate new sts into patt in groups of 5.
1. In reference to the Lace Panel component, which appears in the headers, above the main body of the Instructions.
If working an odd number of stitches, work rows 1 & 3 as foll:
Row 1: K2, [yo, k2tog] to last 3 sts, yo, k1, yo, k2—2 sts inc’d.
Row 3: K1, yo, k3tog, [yo, k2tog] to last 3 sts, yo, k1, yo, k2—1 st inc’d.
2. Row 1 of the entire pattern, under the Instructions header.
K1 without dropping st from LH needle, yo, k1 tbl--3 sts.
3. For the main body of the pattern, under the portion that reads "Work panels as foll, changing colors as needed:"
Work panels as foll, changing colors as needed:
Work Rows 1-4 of Garter Panel 6 times.
Work Rows 1-8 of Lace Panel 3 times, then work Rows 1-4 of Garter Lace Panel once more—49 sts.
Work Rows 1-4 of Garter Panel 8 times—73 sts.
Work Rows 1-8 of Lace Panel 4 times—97 sts.
Work Rows 1-4 of Garter Panel 9 times—124 sts.
Work Rows 1-8 of Lace Panel 5 times—154 sts.
Work Rows 1-4 of Garter Panel 10 times—184 sts.
Work Rows 1-8 of Lace Panel 5 times, then work Rows 1-4 of Garter Lace Panel once more—217 sts.
BO all sts as foll: K1, *k1, k the 2 sts on RH needle tog tbl, rep from * to end.
Under the SLEEVES section of the pattern, the incorrect cast-on number was given.
With smaller needles, using a German twisted or other flexible cast-on, CO 4953 (53, 57, 57, 61, 65) sts.
Work in 1x1 twisted rib as for Back until cuff measures 4 1⁄4"/11cm, ending with a RS row. Next row (WS; inc row): With larger needles, p1, k to last st, M1, p1—5054 (54, 58, 58, 62, 66) sts.
There's a correction to Row 2 of the Body, which should read:
Row 2: Slipping all markers as you come to them, sl 1, work in Moss St to m, p2, work Chart A, p2, work Chart B, p2, k to side m, k to next m, p2, work Chart B, p2, work Chart A, work Chart C, work Chart A, p2, work Chart B, p2, k to side m, k to next m, p2, work Chart B, p2, work Chart A, p2, work in Moss St to last st, k1.
Modular Neck Wrap
Rows 35-60 Rep rows 33 and 34 thirteen times - 3 sts.
Row 1 (RS) With RS facing, pick up and knit 33 sts along short edge of triangle B.
Row 1 (RS) With RS facing, pick up and knit 32 sts along short edge of triangle C - 33 sts.
Row 1 (RS) With RS facing, pick up and knit 33 sts along short edge of triangle D.
Row 1 (RS) With RS facing, pick up and knit 32 sts along short edge of triangle E - 33 sts.
Row 1 (RS) With RS facing, pick up and knit 33 sts along short edge of triangle F.
Row 3 K3, *sl 1 wyib, k2; rep from * to last st, k1.
Joining strip A to strip C
1) Divide yarn into three equal balls, approx 109yd/100m each.
2) Label the 3 bags, one each as color #1, color #2, and color #3.
2. Note that the stitch repeat is 12 sts on the RS rows and 11 sts on the WS rows. When working the charted the WS rows, p10 after the dec in rows 2, 4, 6, 8 and 10; and p10 before the dec in rows 12, 14, 16, 18 and 20.
The vertical line on the chart is missing after the first stitch.
The instructions for the thumb is missing:
Slip the 13 sts from holder to dpn. Join yarn and pick up and k 5 sts across edge of mitt, then k 13 thumb sts—18 sts. Divide sts evenly over 3 needles (6 sts per needle). Join and work in St st to ½"/1.5cm less than desired thumb length.
Next rnd [K7, k2tog] twice—16 sts. Work in k2, p2 rib for 2 rnds. Bind off in rib.
Work as for Left Front to **, ending on a RS row.
Shape side (WS) Inc 1 st, patt to end.
Patt 1 row.
Rep last 2 rows 6 times more. [28(30,32,34,37) sts]
Cont working straight until length measures 16(19,22,25,28) cm, ending on a WS row.
Next row (RS)(buttonhole row) K2, yf, k2tog, patt to end.
Cont working straight until length measures 17(20,23,26,29) cm, ending on a WS row.
Shape front neck (RS) Cast off 4(5,5,5,6) sts, patt to end.
(WS) Patt to last 2 sts, k2tog.
(RS) K2tog, patt to end.
Rep last 2 rows 3 times more. [16(17,19,21,23) sts, 9 shaping rows]
Cont working straight until length measures same as back to cast off edge, ending on a WS row.
Cast off rem sts.
left twist: K second st on LH needle tbl, k first st on LH needle, drop both sts from needle.
right twist: K second st on LH needle, k first st on LH needle, drop both sts from needle.
bobble: Kfb twice, then k once more—5 sts made from one. Turn. P5, turn. Pass 4 sts, one at a time, over first st on RH needle—1 st rem.
twisted left twist, purl bg: Sl 1 st to cn and hold in front, p1, k1 tbl from cn.
twisted right twist, purl bg: Sl 1 st to cn and hold in back, k1 tbl, p1 from cn.
RS: k through the back loop
WS: p through the back loop
Errata: Lace row 5 is missing a K1. It should read: Lace row 5 (RS): K3, yo, k1, * yo, k2tog; rep from * to 1 st before marker, k1, yo, sm, k1, sm, yo, k1, * k2tog, yo; rep from * to last 4 sts, k1, yo, k3 – (4 sts inc’d).
#1 Woven Cape After half linen stitch has been worked for 8"/20.5cm, change to smaller needle before working half linen rib stitch.
#9 Ripple Scarf Right Leaning Waves, Rows 2 and 4: Sl 1, p4, *k3, p3; rep from * to last 2 sts, p1, sl 1.
Left Leaning Wave, Rows 8 and 10 Sl 1, p1, *k3, p3; rep from * to last 5 sts, k3, p1, sl 1.
Left Leaning Transition row: Sl 1, p1, p3, *6-st RC; rep from * to last 2 sts, p1, sl 1.
#15 Garter Triangle Shawl Work as instructed through row 6— 22 sts.
Row 7 (eyelet row) Work as written—26 sts.
Row 8 Knit.
Rows 9—16 Rep rows 3 and 4 four times.
Row 17 (eyelet row) Work as written—4 sts inc'd.
Row 18 Knit.
Rep rows 9–18 ten times more—246 sts.
#22 Colorblock Fisherman's Sweater
2-st LPC tbl Sl 1 to cn and hold to front, p1, k1 tbl from cn.
…, then change to C and work in pats for 1 ½"/4cm, dec 1 st in double seed st on last WS row—61 (65, 69, 73) sts when all shaping is complete.
#24 One Cowl Three Ways Each cowl requires 2 hanks of Shiraito
#27 Rectangular Poncho
Row 2 (RS) Kfb, k to marker, M1, sl marker, k1, M1, k to last 2 sts, kfb, k1—4 sts inc'd.
Join to Left Half
Next row (RS) K1, k2tog, k to last 2 sts of first half, ssk, then with RS facing, ...
#29 Relaxed Cardigan Neck Shaping
Neck Dec row (RS) Work to the last 3 sts, k2tog, k1.
#02 Mitered Wrap
First ribbed section
Row 1 (RS) With CC, k2, *k2, p2; rep from * to 2 sts before marker, remove marker, S2KP, replace marker, *p2, k2; rep from * to 1 st before marker, remove marker, S2KP, replace marker, *k2, p2; rep from * to last 4 sts, k4.
Row 2 (WS) With CC, k2, *p2, k2; rep from * to 2 sts before marker, p1, p2tog tbl, (replacing marker after decrease), *k2, p2; rep from * to 2 sts before marker, k2, sl marker, p2tog, p1, *k2, p2; rep from * to last 2 sts, k2—2 sts dec'd.
#20 Man's Jacket
Beg basketweave pat
Last line:...end with a row 8 of basketweave pat.
Ater Beg pocket trim, after Next row:
Cont in pats as established for 9 rows more, end with row 2 of basketweave pat.
Under Pocket Lining
Last line: ...work rows 1–8 of basketweave pat once, then work rows 1–3 once more.
This should set you up to work the joining row (under Join Pocket) on a WS row, row 4 of the pattern.
Pattern 4. Chevron Scarf
With CC, cast on 65 sts.
Begin Chevron Stitch
Row 1 (RS) With CC, sl 1 purlwise wyif, k1, work row 1 of chevron pat to last 2 sts; with CC, k2.
Row 2 With CC, sl 1 purlwise wyif, k1, work row 2 of chevron pat to last 2 sts; with CC, k2.
Next row (WS) With CC, sl 1 purlwise wyif, knit to end.
Noro Silk Garden - The 20th Anniversary Collection
Modular Piece Cape
Instructions beg on pg 52
Triangle Block 4
Row 2 (WS) SKP, k to marker, sl marker, p1, k to last 2 sts, k2tog.
Row 3 (RS) With ball 2, k to 2 sts before marker, SK2P at marker, k to end.
Rep rows 2–3 in the stripe pat until 4 sts rem, end with (RS) row 3.
Last row (WS) Sl 1, k3tog, psso. Fasten off last st.
Triangle Block 6
Rep rows 2–3 until 6 sts rem.
Next row Rep row 2.
Last row Sl 1, k3tog, psso and fasten off last st.
Gothic Shawl -- Page 98 Materials
Silk Garden Lite #2088
Please note the beginning of the instructions for the BACK has changed:
With larger needles, cast on 101 (111, 121, 131, 141) sts.
K 1 row (WS). Work in Pattern A for a total of 40 rows.
Knit 4 rows.
Next Row: K2, [yo, k2tog], rep to last st, k1
Knit 3 rows.
Work 4 rows in st st.
K 4 rows.
Next Row: K2, [yo, k2tog], rep to last st, k1.
Knit 3 rows.
Continue in Pattern B for a total of 40 rows.
Knit 4 rows.
Next Row: K2, [yo, k2tog], rep to last st, k1.
Knit 3 rows.
Continue in Pattern C until work measures 38cm/15in, ending with a WS row.
On the Right Front and Left Front pieces, stitch counts after armhole and neck shaping are incorrect.
It should read: 14 (17, 18, 21, 23, 25, 26, 29) sts rem after armhole and neck shaping.
[RF armhole shaping is written on neck edge]
Additional Right Front Correction:
BO 4 (5, 7, 8, 9, 11, 12, 13) sts at the beg of next WS row.
Knit 1 RS row.
Dec row (WS): P2tog, p to end—1 st dec’d.
Rep Dec Row every WS row 3 (4, 5, 6, 8, 9, 11, 12) more times—31 (34, 37, 40, 42, 44, 47, 50) sts when armhole and neck shaping are complete.
Using 5.00mm needles, cast on 37(39,41,41) sts.
Work 6 cm in rib as for Back, ending on a WS row, dec 0(0,1,0) st on last row worked. [37(39,40,41) sts]
Change to 6.00mm needles. **
(RS) P4(5,6,6) sts, work row of Cable Panel, p0(1,1,2) st/s, leave last 7 sts on a holder for front band.
Row 1 (WS) K0(1,1,2) st/s, work row 2 of Cable Panel, k4(5,6,6) sts.
Row 2 (RS) P4(5,6,6) sts, work row 3 of Cable Panel, p0(1,1,2) st/s.
These 2 rows set pattern.
*** Cont working in patt as set until length measures same as Back to armhole shaping, ending on a WS row.
Shape armhole (RS) Cast off 4 sts, patt to end. [26(28,29,30) sts]
Cont working in patt until length (incl band) measures, 36(40,44,48) cm, ending on a RS row.
(WS) Cast off 5(6,6,6) sts, patt to end.
(RS) Patt to last 2 sts, p2tog.
(WS) K2tog, patt to end.
Rep last 2 rows twice more. [15(16,17,18) sts]
Book reads this way:
Page 20 states a tension of 18 stitches and 20 rows measured over 10cm/4 in of stocking stitch using 6mm needles.
Page 22 states a tension of 14 stitches and 20 rows measured over 10cm/4 in of stocking stitch using 6mm needles.
Page 20 should read the same as page 22: 14 sts NOT 18 sts.
Rows 1 and 3: Edge st, [k3, p1] 2 (3) 4 (5) times, k3, p5, * k3, p1, k3, p5; repeat from *, ending last repeat with [k3, p1] 2 (3) 4 (5) times, k3, edge st.
Rows 2 and 4: Edge st, [p1, p1] 5 (7) 9 (11) times, p1, k5, * p1, [k1, p1] 3 times, k5; repeat from * and end with p1, [k1, p1] 5 (7) 9 (11) times, edge st.
Row 5: Edge st, [k3, p1] 2 (3) 4 (5) times, k3, p2, (k1, p1, k1) into the same st, p2, * k3, p1, k3, p2, (k1, p1, k1) into the same st, p2; repeat from * and end with [k3, p1] 2 (3) 4 (5) times, k3, edge st.
Row 6: Edge st, [p1, p1] 5 (7) 9 (11) times, p1, k2, p3, k2, * p1, [k1, p1] 3 times, k2, p3, k2; repeat from * and end with p1, [k1, p1] 5 (7) 9 (11) times, edge st.
Rows 7 and 9: Edge st, [k3, p1] 2 (3) 4 (5) times, k3, p2, k3, p2, * k3, p1, k3, p2, k3, p2; repeat from * and end with [k3, p1] 2 (3) 4 (5) times, k3, edge st.
Rows 8 and 10: Work as for Row 6.
Row 11: Edge st, [k3, p1] 2 (3) 4 (5) times, k3, S2Kp2, * k3, p1, k3, S2Kp2; repeat from * and end with [k3, p1] 2 (3) 4 (5) times, k3, edge st.
Row 12: Work as for Row 2.
Repeat these 12 rows.
This means that after working Row 2 you have 11 (15) 19 (23) ribbed sts inside the edge st at each side and 5 panels of 5 sts each in reverse stockinette with 7 ribbed sts between.
For the sleeves, begin the increases at 2" / 5 cm, not the 2 1/2"/ 6 cm stated in the pattern. Also, the increases above the curlicue pattern (chart B) should be made every 2nd row, not every 4th row.
Work in patt as follows: Row 1 : K1, *K4, p2, rep from * to last st, k1.
Row 2: K1, *k2, p4, rep from * to last st, k1.
Row 3 : K1, *C4F, p2, rep from * to last st, k1.
Row 4: K1, *k2, p4, rep from * to last st, k1.
Row 5 : K1, *K4, p2, rep from * to last st, k1.
Row 6: K1, *k2, p4, rep from * to last st, k1.
Last 6 rows form cable patt and are repeated, until work measures 40 cm, 16 in, ending with a WS row.
With smaller needles, CO 15 sts. Knit 1 row. Work 6–row lace pattern as foll:
Row 1: Sl 1, k2, [yo, k2tog] twice, k3, yo, k2tog, [yo] 3 times, k2tog, k1. --2 sts inc'd
Row 2: Sl 1, k2, p1, k3, yo, k2tog, k5, yo, k2tog, k1. NOTE: do not drop YOs from prev row. Work each YO as a single st.